Bed Size Finder
Measure your mattress to find the nearest US bed-size references, with width and length differences shown separately.
You’ll receive ranked references, signed differences, and an approximate or exact-reference result—not a fit score.
How this works
Convert each entered measurement to inches using 1 inch = 2.54 cm. For each conventional US mattress reference, calculate signed width and length differences, then rank by Euclidean distance: √(Δwidth² + Δlength²). Your chosen tolerance applies independently to both dimensions; a nonzero difference within tolerance is approximate, never a verified sheet fit. Equal nearest distances remain ambiguous. No exact reference is forced for uncommon measurements. A clear exact or tolerance-based catalog size can be suggested for confirmation, without choosing a color.
US mattress references are not Abeero Home sheet measurements. Actual manufacturers can vary.
- Mattress Sizes 101: Finding Your Perfect Fit
Sleep Foundation · general guidance
- Conventional US mattress width × length in inches: Twin 38 × 75; Twin XL 38 × 80; Full 54 × 75; Queen 60 × 80; King 76 × 80; California King 72 × 84.
Mattress references only. Not Abeero Home sheet dimensions, pocket depth, or verified fit.
Retrieved 2026-10-18. Reviewed 2026-10-18.
- What are the dimensions of your Bedding products?
Brooklinen · comparative example
- Brooklinen lists Queen fitted sheets at 60 × 80 × 16 inches and Queen flat sheets at 92 × 104 inches.
- Brooklinen lists Standard pillows at 20 × 26 inches and King pillows at 20 × 36 inches; its pillowcases are separately listed at 20 × 27 and 20 × 37 inches.
Competitor examples only. Listed fitted-sheet depth is not an independently verified Abeero Home maximum fit depth.
Retrieved 2026-10-18. Reviewed 2026-10-18.
Common questions
What size sheets do I need for a 60 by 80-inch mattress?
60 × 80 inches matches the conventional US Queen mattress reference. Start by reviewing Queen sheets, then confirm their intended mattress footprint and depth support, including any topper.
What tolerance should I enter?
Use the maximum measurement difference you are prepared to treat as approximate, separately for width and length. Zero means an exact numerical reference match. The tool does not choose a hidden tolerance for you.
What if my measurements are unusual?
Every US reference remains visible with both differences. If none is exact or within your chosen tolerance, the nearest name is reported only as a reference, with no automatic product suggestion.
Can Twin sheets replace Twin XL sheets?
No substitute is recommended. The conventional Twin XL reference is 38 × 80 inches, versus Twin 38 × 75. Twin XL is not in Abeero Home’s catalog.
Does the country change the US table?
No. This finder compares actual dimensions with the US table. The international converter adds country-specific nominal names without treating them as exact equivalents.